1. |
What is the rebuilding time under RAID 5 for the HDPro?
|
2. |
What is the capacity loss, when the HDPro is set to RAID 5 or 6?
|
3. |
What is the useable capacity for HDPro 2.56TB?
|
4. |
How come my CalDigit array only shows 5,588GB (instead of full 6000GB)?
|
5. |
I am unable to launch RAIDShield?
|
6. |
I created a joint array via my CalDigit RAID card and the HDElement, how come it is not showing on the desktop?
|
7. |
PCI-Express Lane Amount Requirements
|
8. |
I can use my RAID drive, but RAIDShield shows Controller Disconnected, what should I do?
|
9. |
OS X crashed or had a kernel panic while using CalDigit storage products, what do I do?
|
10. |
Cannot see my drive under Mac OS 10.2 or 10.3
|
11. |
How do I partition my drive in Microsoft Windows®?
|
12. |
I cannot see my disk array in the 32bit Microsoft Windows®.
|
13. |
How do I partition my drive in Mac OS X®?
|
14. |
RAIDShield server said 'Found no RAID Card', and RAIDShield client cannot scan the controller for my device.
|
15. |
If I am using a CalDigit RAID card with an HDElement and no internal RAID do I need the bootcamp cable or the mini-sas cable
|
16. |
Where is the RAIDShield event log?
|
17. |
How do I update the System Code / Boot Code / BIOS / EFI via RAIDShield?
|
18. |
Updating the HDPro / HDOne / CalDigit RAIDCard / HDElement for the latest driver (Version 1.9.3)
|
19. |
Why does my CalDigit RAID Card not fit inside my Mac Pro (early 2009)?
|
20. |
A yellow exclamation mark in my Device Manger?
|
21. |
Mac OS X update procedures
|
22. |
Retrieve Your System Log and Profile Files
|
23. |
Mac OS-X 10.6 (Snow Leopard) UPDATE NOTES
|
24. |
When trying to install new driver or software, it makes my Mac OS crash or error?
|
25. |
HDPro / HDOne / CalDigit RAID Card/ HDElement CentOS 5.3 installation procedure
|
26. |
RAID Array with OSX installed on the CalDigit Products.
|
27. |
After installing the CalDigit driver, I am encountering a Kernel Panic when I boot up my Mac OS, what should I do?
|
28. |
Using RAIDShield and iPartition to expand the RAID array and partition.
|
29. |
CalDigit Product Warranty Status Check List
|
30. |
Can I use Apple "File Sharing" with CalDigit storage?
|
31. |
I am unable to format and mount the drive in disk utility?
|
32. |
Download Update NOTES: 01-21-2010
|
33. |
HDPro, HDOne, CalDigit RAIDCard installation procedure
in Windows 7 64-bit environment.
|
34. |
How to configure an NFS share from Mac OSX server to Linux?
Using HDPro as an example
|
35. |
I am unable to boot up my computer while connecting HDPro/HDOne to it?
|
36. |
Adding a second HDelement to the existing array?
|
37. |
What TCP port numbers are used by RAIDShield to communicate with HDPro controller?
|
38. |
How to remove CalDigit driver in Windows manually?
|
39. |
Final Cut Pro X cannot save to my CalDigit drive
|
40. |
How to unlock a "B" (locked) drive?
|
41. |
My CalDigit drive is only showing a 2.2TB format-able area in the Windows Disk Management.
|
42. |
EFI and SMC firmware updates for Intel-based Macs
|
43. |
Drive displays different capacity than the size reported by OS?
|
44. |
File transfer fails on Samba service (Error code -36)
|
45. |
Retrieve Your Windows System Information
|
46. |
How do I manually delete Windows drivers from DOS command line?
|
47. |
How to partition a windows drive that was previously formatted in Mac?
|
48. |
How to reset NVRAM and SMC on your Mac?
|