| 1. |
What is the rebuilding time under RAID 5 for the HDPro?
|
| 2. |
What is the capacity loss, when the HDPro is set to RAID 5 or 6?
|
| 3. |
What is the useable capacity for HDPro 2.56TB?
|
| 4. |
How come my CalDigit array only shows 5,588GB (instead of full 6000GB)?
|
| 5. |
I would like to use HDPro or HDOne with PCI-X machine, can the HDPro be used with my machine and would I experience slower performance?
|
| 6. |
I am unable to launch RAIDShield?
|
| 7. |
How to add a redundant power supply to your HDPro?
|
| 8. |
I am experiencing slower performance when connecting with 10 meter or longer PCIe cable, what do I do?
|
| 9. |
PCI-Express Lane Amount Requirements
|
| 10. |
I can use my RAID drive, but RAIDShield shows Controller Disconnected, what should I do?
|
| 11. |
OS X crashed or had a kernel panic while using CalDigit storage products, what do I do?
|
| 12. |
Cannot see my drive under Mac OS 10.2 or 10.3
|
| 13. |
How do I partition my drive in Microsoft Windows®?
|
| 14. |
I cannot see my disk array in the 32bit Microsoft Windows®.
|
| 15. |
How do I partition my drive in Mac OS X®?
|
| 16. |
RAIDShield server said 'Found no RAID Card', and RAIDShield client cannot scan the controller for my device.
|
| 17. |
Where is the RAIDShield event log?
|
| 18. |
How do I update the System Code / Boot Code / BIOS / EFI via RAIDShield?
|
| 19. |
Updating the HDPro / HDOne / CalDigit RAIDCard / HDElement for the latest driver (Version 1.9.3)
|
| 20. |
A yellow exclamation mark in my Device Manger?
|
| 21. |
Mac OS X update procedures
|
| 22. |
Unable to recognize HDPro or HDOne during setup in Mac or Windows machine?
|
| 23. |
Retrieve Your System Log and Profile Files
|
| 24. |
Mac OS-X 10.6 (Snow Leopard) UPDATE NOTES
|
| 25. |
When trying to install new driver or software, it makes my Mac OS crash or error?
|
| 26. |
HDPro / HDOne / CalDigit RAID Card/ HDElement CentOS 5.3 installation procedure
|
| 27. |
RAID Array with OSX installed on the CalDigit Products.
|
| 28. |
After installing the CalDigit driver, I am encountering a Kernel Panic when I boot up my Mac OS, what should I do?
|
| 29. |
Using RAIDShield and iPartition to expand the RAID array and partition.
|
| 30. |
CalDigit Product Warranty Status Check List
|
| 31. |
How to install HDPro Rackmount Kit?
|
| 32. |
Can I use Apple "File Sharing" with CalDigit storage?
|
| 33. |
I am unable to format and mount the drive in disk utility?
|
| 34. |
Download Update NOTES: 01-21-2010
|
| 35. |
HDPro, HDOne, CalDigit RAIDCard installation procedure
in Windows 7 64-bit environment.
|
| 36. |
How to configure an NFS share from Mac OSX server to Linux?
Using HDPro as an example
|
| 37. |
I am unable to boot up my computer while connecting HDPro/HDOne to it?
|
| 38. |
How to upgrade your HDPro to HDPro2?
|
| 39. |
How many rack units is the HDPro2 rack mount kit?
|
| 40. |
What TCP port numbers are used by RAIDShield to communicate with HDPro controller?
|
| 41. |
How to remove CalDigit driver in Windows manually?
|
| 42. |
Final Cut Pro X cannot save to my CalDigit drive
|
| 43. |
Slower performance or partition error on HDPro2/HDPro or HDPro-24
|
| 44. |
How to unlock a "B" (locked) drive?
|
| 45. |
My CalDigit drive is only showing a 2.2TB format-able area in the Windows Disk Management.
|
| 46. |
EFI and SMC firmware updates for Intel-based Macs
|
| 47. |
Drive displays different capacity than the size reported by OS?
|
| 48. |
File transfer fails on Samba service (Error code -36)
|
| 49. |
Retrieve Your Windows System Information
|
| 50. |
How do I manually delete Windows drivers from DOS command line?
|
| 51. |
How to partition a windows drive that was previously formatted in Mac?
|
| 52. |
How to reset NVRAM and SMC on your Mac?
|
